In this article we will demonstrate a React Front-End app served through Spring Boot's embedded Tomcat. Why do it this way? We can serve a React app in different ways (e.g. Apache Web Server, Nginx, etc.). What is so special about serving a React app through Spring Boot's Tomcat? There is nothing special. A reason could be that the development team is already well versed in Spring Boot with Tomcat. They have mastered configuring Tomcat and investing in a new web server (e.g. Nginx) is of little value. Another could be the deployment pipeline is already set up to do Java/Maven deployment (e.g. Jenkins). Lastly, it could be that you are a new hire and the development team already do it that way. That is, we don't have a choice but to support an existing React FE app served through Spring Boot.
Our focus will be on building the React app so that it can be deployed through a Spring Boot fat jar. We will lightly touch on starting a Spring Boot and React apps. It is assumed that the reader has knowledge regarding Node, React, Java, Maven, Spring Boot, etc. The reader should know how to set up the mentioned technology stack.
If you have been reading my past blogs, then the previous paragraphs sound so familiar. That is because I have done a similar thing for an Angular app. Essentially this article is similar to Angular FE Spring Boot Example. But I added in an extra. In my Angular FE Spring Boot Example, we had to do two steps to build the fat jar. In this article, we will build the fat jar in one step. Sounds good? Let's do it!
Building
Same as in my Angular FE Spring Boot Example, there were two ways to build a React app so that it can be deployed as single Spring Boot fat jar. First one is to use the exec-maven-plugin. Second is to use the maven-resources-plugin.
But wait. There's more. We'll be using the maven-resource-plugin in combination with frontend-maven-plugin. With these two plugins working together, we only need to run one command to build the fat jar. This means, we have leveled up from Angular FE Spring Boot Example.
Spring Initializr
Head over to Spring Initializr and it should look like below:
 |
| Spring Initializr |
React Bit
Under the root directory, create a dev folder. This is where all the React stuff goes. Assuming you have Node, Node Version Manager and Node Package Manager ready, run npx create-react-app my-app to set up a web app. We should have something like below:
D:\workspace\react-fe-spring-boot\dev>npx create-react-app my-app
Need to install the following packages:
create-react-app@5.0.1
Ok to proceed? (y) y
Creating a new React app in D:\workspace\react-fe-spring-boot\dev\my-app.
Installing packages. This might take a couple of minutes.
Installing react, react-dom, and react-scripts with cra-template...
Created git commit.
Success! Created my-app at D:\workspace\react-fe-spring-boot\dev\my-app
Inside that directory, you can run several commands:
npm start
Starts the development server.
npm run build
Bundles the app into static files for production.
npm test
Starts the test runner.
npm run eject
Removes this tool and copies build dependencies, configuration files
and scripts into the app directory. If you do this, you can’t go back!
We suggest that you begin by typing:
cd my-app
npm start
Happy hacking!
We follow the bottom two commands (i.e. cd my-app, npm start) and we should have something like below. For more details, head over to Create React App. Thank you Create React App for creating our project. The React app should be available at localhost:3000.
 |
| React app on port 3000 |
Build the React project, npm run build. This will create files in the build directory. Take note of this folder as we will need it in our POM file. We should see something like below after the build:
D:\workspace\react-fe-spring-boot\dev>npm run build
> my-app@0.1.0 build
> react-scripts build
Creating an optimized production build...
Compiled successfully.
File sizes after gzip:
46.61 kB build\static\js\main.46f5c8f5.js
1.78 kB build\static\js\787.28cb0dcd.chunk.js
541 B build\static\css\main.073c9b0a.css
The project was built assuming it is hosted at /.
You can control this with the homepage field in your package.json.
The build folder is ready to be deployed.
You may serve it with a static server:
npm install -g serve
serve -s build
Find out more about deployment here:
https://cra.link/deployment
Maven Bit
We don't need to change any Java code. The key is in the POM. We will copy the build files over to the classes/static folder and then Maven will take care of making the fat jar. Add the maven-resources-plugin like below (make sure you get the diretories right ;) ):
<plugin>
<artifactId>maven-resources-plugin</artifactId>
<executions>
<execution>
<id>copy-resources</id>
<phase>validate</phase>
<goals>
<goal>copy-resources</goal>
</goals>
<configuration>
<outputDirectory>${build.directory}/classes/static/</outputDirectory>
<resources>
<resource>
<directory>dev/my-app/build</directory>
</resource>
</resources>
</configuration>
</execution>
</executions>
</plugin>
Running the Fat Jar
Do a mvn clean package. Now, run java -jar ./target/react-fe-spring-boot-0.0.1-SNAPSHOT.jar and we should be able to see the it running on localhost:8080. It's now being served by Tomcat.
 |
| React app on port 8080 |
Wait? What?! That was 2 steps to build it into a fat jar! What gives?
One Command to Build Them All
To build it all in one command, we'll enlist the help of the frontend-maven-plugin and a minor change on maven-resource-plugin. Before we do that, let's review the goals bound to the package phase, run mvn help:describe -Dcmd=package.
D:\workspace\react-fe-spring-boot>mvn help:describe -Dcmd=package
[INFO] 'package' is a phase corresponding to this plugin:
org.apache.maven.plugins:maven-jar-plugin:2.4:jar
It is a part of the lifecycle for the POM packaging 'jar'. This lifecycle includes the following phases:
* validate: Not defined
* initialize: Not defined
* generate-sources: Not defined
* process-sources: Not defined
* generate-resources: Not defined
* process-resources: org.apache.maven.plugins:maven-resources-plugin:2.6:resources
* compile: org.apache.maven.plugins:maven-compiler-plugin:3.1:compile
* process-classes: Not defined
* generate-test-sources: Not defined
* process-test-sources: Not defined
* generate-test-resources: Not defined
* process-test-resources: org.apache.maven.plugins:maven-resources-plugin:2.6:testResources
* test-compile: org.apache.maven.plugins:maven-compiler-plugin:3.1:testCompile
* process-test-classes: Not defined
* test: org.apache.maven.plugins:maven-surefire-plugin:2.12.4:test
* prepare-package: Not defined
* package: org.apache.maven.plugins:maven-jar-plugin:2.4:jar
* pre-integration-test: Not defined
* integration-test: Not defined
* post-integration-test: Not defined
* verify: Not defined
* install: org.apache.maven.plugins:maven-install-plugin:2.4:install
* deploy: org.apache.maven.plugins:maven-deploy-plugin:2.7:deploy
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 6.947 s
[INFO] Finished at: 2023-08-06T23:04:08+01:00
[INFO] ------------------------------------------------------------------------
First change is to make maven-resources-plugin execute on the generate-sources phase. Change validate like so.
<plugin>
<artifactId>maven-resources-plugin</artifactId>
<executions>
<execution>
<id>copy-resources</id>
<!-- <phase>validate</phase> -->
<phase>generate-sources</phase>
...snipped...
Next is add the frontend-maven-plugin like so.
<plugin>
<groupId>com.github.eirslett</groupId>
<artifactId>frontend-maven-plugin</artifactId>
<version>1.11.3</version>
<configuration>
<workingDirectory>dev/my-app</workingDirectory>
<nodeVersion>v18.10.0</nodeVersion>
<yarnVersion>v1.22.17</yarnVersion>
</configuration>
<executions>
<execution>
<id>install-frontend-tools</id>
<goals>
<goal>install-node-and-yarn</goal>
</goals>
<phase>validate</phase>
</execution>
<execution>
<id>build-frontend</id>
<goals>
<goal>yarn</goal>
</goals>
<phase>initialize</phase>
<configuration>
<arguments>build</arguments>
</configuration>
</execution>
</executions>
</plugin>
Now, do you know why I had to show you the Maven package phases? During the package phase, the first thing that will be done by the frontend plugin will be to install node and yarn (i.e. validate phase). After that is building the React app, yarn build (i.e. initialize phase). And lastly, resources will copy the files over (i.e. generate-sources phase). Viola! We're ready to run the build again. Remove the built files (e.g. mvn clean or delete target directory, delete the React app build directory) and then do a mvn clean package. You should see something like below. After the build you should be able to run the jar like before.
D:\workspace\react-fe-spring-boot>mvn clean package
[INFO] Scanning for projects...
[INFO]
[INFO] -------------< com.blogspot.jpllosa:react-fe-spring-boot >--------------
[INFO] Building react-fe-spring-boot 0.0.1-SNAPSHOT
[INFO] --------------------------------[ jar ]---------------------------------
[INFO]
[INFO] --- maven-clean-plugin:3.2.0:clean (default-clean) @ react-fe-spring-boot ---
[INFO]
[INFO] --- frontend-maven-plugin:1.11.3:install-node-and-yarn (install-frontend-tools) @ react-fe-spring-boot ---
[INFO] Installing node version v18.10.0
[INFO] Copying node binary from C:\Users\jpllosa\.m2\repository\com\github\eirslett\node\18.10.0\node-18.10.0-win-x64.exe to D:\workspace\react-fe-spring-boot\dev\my-app\node\node.exe
[INFO] Installed node locally.
[INFO] Installing Yarn version v1.22.17
[INFO] Unpacking C:\Users\jpllosa\.m2\repository\com\github\eirslett\yarn\1.22.17\yarn-1.22.17.tar.gz into D:\workspace\react-fe-spring-boot\dev\my-app\node\yarn
[INFO] Installed Yarn locally.
[INFO]
[INFO] --- frontend-maven-plugin:1.11.3:yarn (build-frontend) @ react-fe-spring-boot ---
[INFO] Running 'yarn build' in D:\workspace\react-fe-spring-boot\dev\my-app
[INFO] yarn run v1.22.17
[INFO] $ react-scripts build
[INFO] Creating an optimized production build...
[INFO] Compiled successfully.
[INFO]
[INFO] File sizes after gzip:
[INFO]
[INFO] 46.61 kB build\static\js\main.46f5c8f5.js
[INFO] 1.78 kB build\static\js\787.28cb0dcd.chunk.js
[INFO] 541 B build\static\css\main.073c9b0a.css
[INFO]
[INFO] The project was built assuming it is hosted at /.
[INFO] You can control this with the homepage field in your package.json.
[INFO]
[INFO] The build folder is ready to be deployed.
[INFO] You may serve it with a static server:
[INFO]
[INFO] npm install -g serve
[INFO] serve -s build
[INFO]
[INFO] Find out more about deployment here:
[INFO]
[INFO] https://cra.link/deployment
[INFO]
[INFO] Done in 8.49s.
[INFO]
[INFO] --- maven-resources-plugin:3.2.0:copy-resources (copy-resources) @ react-fe-spring-boot ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Using 'UTF-8' encoding to copy filtered properties files.
[INFO] Copying 15 resources
[INFO]
[INFO] --- maven-resources-plugin:3.2.0:resources (default-resources) @ react-fe-spring-boot ---
[INFO] Using 'UTF-8' encoding to copy filtered resources.
[INFO] Using 'UTF-8' encoding to copy filtered properties files.
[INFO] Copying 1 resource
[INFO] Copying 0 resource
There you have it. Serving a Rect app through Spring Boot's fat jar and embedded Tomcat. Plus building it in one command! Grab the full repo here, github.com/jpllosa/react-fe-spring-boot
No comments:
Post a Comment